EFFECT OF CALCINATION TEMPERATURE ON F-DOPED LiFePO4 CATHODE MATERIAL ON FORMATION OF OLIVINE PHASE
DOI:
10.29303/ipr.v4i3.99Downloads
Abstract
Olivine single phase of LiFePO4 was successfully synthesized by solid-state reaction (SSR) method through the formation of Fe2P2O7 from precursors of Li2CO3, F2O3, NH4H2PO4, and LiF as materials doping. Variations at temperatures of calcination 670 0C, 700 0C and 750 0C with doped 0.1F. TGA-DSC test results show that the LFP sample undergoes decomposition in the temperature range 0-600 0C. The olivine phase formed at temperatures of more than 650 0C and the oxidation process on the LiFePO4/C sample was completed, and the sample mass was constant. The olivine phase formed was determined by comparing the 2𜃠value obtained through characterization with the ICDD LFP (01-081-1173), and accordingly with experiment. The increase of the temperature results from a dominant LFP phase with a larger grain size. The effect of increasing the calcination temperature at 0.1F has resulted in an enlargement of the particle size.Keywords:
Olivine Single Phase Lithium Ion Battery Cathode Solid State Reaction Calcination Temperature TGA-DSC MethodReferences
C. Julien. A. Mauger. A. Vijh. K. Zaghib (2016). Lithium Batteries, Science and Technology. Library of Congress. Springer International Publishing. New York.
Pier P Prosini (2011). Iron Phosphate Materials as Cathodes for Lithium Batteries. Library of Congress. Springer International Publishing. New York.
Yongan Huang. Yunlong Xu. Xu Yang. (2013). Enhanced electrochemical performances of LiFePO4/C by co-doping with magnesium and fluorine. Electrochimica Acta, 113, 156-163. doi: http://dx.doi.org/10.1016/j.electacta.2013.09.044
Z. C. Huertas (2017). Alternative approaches for the fabrication of electrodes based on LiFePO4 as cathodes in LIBs. Dissertation. Chemistry Departement. Faculty of Science. Univ: Autonoma de Barcelona.
Hassan Karami & Foroozandeh Taala (2016). Synthesis, characterization and application of Li3Fe2(PO4)3 nanoparticles as cathode of lithium-ion rechargeable batteries. Journal of Power Source, 196, 6400-6411. doi: https://doi.org/10.1016/j.jpowsour.2011.03.079.
Ahmat Örnek, Emrah Bulut, and Mahmut Özacar (2011). Effect of Temperature on Synthesis of Nano LiFePO4/C Cathode Active Material for Lithium-Ion Batteries. Advanced Science, Engineering, and Machine, 3, 104-104. doi: https://doi.org/10.1166/asem.2011.1085.
C. Miao. P. Bai. Q. Jiang S. Sun. X. Wang (2014). A novel synthesis and characterization of LiFePO4 and LiFePO4/C as a cathode material for lithium-ion battery. Journal of Power Source, 246, 232-238. doi: http://dx.doi.org/10.1016/j.jpowsour.2013.07.077.
Rakesh Saroha & Amrish K Panwar (2017). Effect of in situ pyrolysis of acetylene (C2H2) gas as a carbon source on the electrochemical performance of LiFePO4 for rechargeable lithium-ion batteries. Journal of Physics D: Applied Physics, 50, 1-12. doi: https://doi.org/10.1088/1361-6463/aa708c.
Wang. L. Liang. G.C. Ou. X.Q. Zhi. X.K. Zhang. J.P. Cui. J.Y (2009). Effect of Synthesis Temperature on The Properties of LiFePO4/C Composites Prepared by Carbothermal Reduction. Journal of Power Sources 189, pp 423–428. doi: https://doi.org/10.1016/j.jpowsour.2008.07.032 .
License
Authors retain the copyright to their work and grant Indonesian Physical Review a non-exclusive right of first publication. All articles are published under the Creative Commons Attribution-ShareAlike 4.0 International License (CC BY-SA 4.0). Authors retain their publishing rights without restrictions and may distribute, deposit, or reuse the published version of their work, provided that its initial publication in Indonesian Physical Review is properly acknowledged. Indonesian Physical Review does not require authors to transfer copyright to the journal or publisher.
