DETECTION OF DISPLACEMENT USING GLASS OPTICAL FIBER SENSOR WITH VARIOUS CONFIGURATION
Authors
Annamaintin Kobong Lebang , A Arifin , Bualkar AbdullahDOI:
10.29303/ipr.v4i3.124Published:
2021-09-30Issue:
Vol. 4 No. 3 (2021)Keywords:
Displacement, GOF, OTDR, Sensor, SMS.Articles
Downloads
How to Cite
Abstract
The research has measured the landslide using a displacement sensor based on Glass Optical Fiber (GOF) and Optical Time Domain Reflectometer (OTDR). The sensor manufacture process consists of various materials, structures, configurations, diameters, and directions. The sensor is made using GOF with a single-mode structure and single mode-multimode-Singlemode (SMS) structure. Each system is given a variety of configurations, namely gamma, bowknot, and three loops configuration. Each arrangement is provided a variation of the indentation diameter in three displacement directions. The test results will be read as the power loss on the OTDR in dB units. The results obtained were then compared between two materials, two structures, and directions. Displacement resulting landslides and changes to the sensor, causing power losses, and affecting the characteristics of each sensor. We found the best measurement results with the sensitivity value of 0.241 dB/mm and the resolution value of 0.004 mm. The displacement sensor has been made for measuring landslide in the laboratory-scale simulation based on GOF and OTDR with easier fabrication, easy operation, high sensitivity, better resolution and can be connected to a computerReferences
Z. Yu, H. Dai, Q. Zhang, M. Zhang, L. Liu, J. Zhang, X. Jin (2018). High-resolution distributed strain sensing system for landslide monitoring. Optik 158 91-96. Doi: http://dx.doi.org/10.1016/j.ijleo.2017.12.013
T. I. H. Sitorus (2020). Corporate Social Responsibility (CSR) Sebagai Alternatif Sumber Dana Penanggulangan Bencana Alam. Jurnal Dialog Penaggulangan Bencana 11 (2) 103-116. Available online from: https://bnpb.go.id/buku/jurnal-dialog-penanggulangan-bencana-volume-11-nomor-2-tahun-2020 . [Accessed August 10, 2021].
M. Sharma, S. Laskar (2017). Landslide Mapping, monitoring and modeling techniques: a new approach using DOFS. IEEE Proceeding of Second International conference on Circuits, Control and Communication 21-24. Doi: http://dx.doi.org/10.1109/CCUBE.2017.8394149
Y. Zheng, Z. W. Zhu, W. J. Li, D. M. Gu, W. Xiao (2019). Experimental research on a novel optic sensor based on OTDR for landslide monitoring. Measurement: 148 106926 1-9. Doi: https://doi.org/10.1016/j.measurement.2019.106926
Y. Zheng, D. Huang, Z. W. Zhu, W. J. Li (2018). Experimental study on a parallel-series connected fiber-optic displacement sensor for landslide monitoring. Optic and Lasers in Engineering: 111 236-245. Doi: https://doi.org/10.1016/j.optlaseng.2018.08.017
M. H. Younus, O. F. Ameen, N. Redzuan, N. Ahmad, R. K. R Ibrahim (2017). Fabrication and characterization of multimode optical fiber sensor for chemical temperature monitoring using optical time domain reflectometer. Karbala International Journal of Modern Science: xx 1-7. Doi: https://doi.org/10.1016/j.kijoms.2017.12.002
C. S. Fernandes, M. T. M. R. Giraldi, M. J. Sousa, J. C. W. A. Costa, C. Gouveia, P. Jorge, M. A. R. Franco (2016). Curvature and Vibration Sensing Based on Core Diameter Mismatch Structures. IEEE Transactions on Instrumentation and Measurement: 1-8. Doi: https://doi.org/10.1109/TIM.2016.2571378
A. Arifin, A. M. Hatta, M. S. Muntini, and A. Rubiyanto (2014). Bent of Plastic Optical Fiber with Structural Imperfections for Displacement Sensor. Indian Journal of Pure and Applied Physics, 52, 520-524. Doi: https://doi.org/10.1007/s13320-015-0225-4
A. Arifin, A. Samsu, M. Yunus, B. Abdullah, D. Tahir (2019). Sensitivity Enhancement of Strain Sensor Based on Polymer Optical Fiber for Concrete Testing. IOP Conf.Journal of Physics 1341 082034. Doi: https://doi.org/10.1088/1742-6596/1341/8/082034
A. Arifin, Kasmiah, M. Yunus, S. Dewang, B. Abdullah, D. Tahir (2019). Analysis characteristics embedded plastic optical fiber sensors for crack detection in concrete structures. IOP Conf series: Earth and Environmental and Science 235 1-5. Doi: https://doi.org/10.1088/1755-1315/235/1/012013
A. Arifin, N. I. Rusyam, A. K. Lebang, B. Abdullah, D. Tahir (2021). High sensitivity and resolution sensor plastic optical fiber for determining compressive and tensile tensor concrete applications. Journal of Physics: Conference Series 1763 012004. Doi: https://doi.org/10.1088/1742-6596/1763/1/012004
H. S. Huang, J. S. Pan, Y. M Tseng, W. Fang, R. M. Shih (2018). Development of Optical Fiber Stress Sensor Based on OTDR. Springer International Publishing 215-222. Doi: https://doi.org/10.1007/978-3-319-63859-1_27
M. H. Younus, O. F. Ameen, N. Redzuan, R. K. R Ibrahim, N. Redzuan (2016). Fuel detection system using OTDR with multimode fiber. Jurnal Teknologi: 79 (3) 107-112. Doi: https://doi.org/10.11113/jt.v79.7686
A. Arifin, A. K. Lebang, M. Yunus, S. Dewang, I. Idris, D. Tahir (2019). Measurement Heart Rate Based on Plastic Optical Fiber Sensor. IOP Conf.Series: Journal of Physics: conf. Series UPIS 2018: 1170 (012074) 1-7. Doi: https://doi.org/10.1088/1742-6596/1170/1/012074
A. Arifin, K. R. Amaliyah, A. K. Lebang, N. Hamrun, S. Dewang, D. Tahir (2021). Enhance sensitivity of plastic optical fiber sensor by spiral configuration for body temperature applications. Journal of Physics: Conference Series 1811 012026. Doi: https://doi.org/10.1088/1742-6596/1811/1/012026
Y. Zheng, W. Xiao, Z. W. Zhu (2020). A simple macro-bending loss optical fiber crack sensor for the use over a large displacement range. Optical Fiber Technology 58 102280. Doi: https://doi.org/10.1016/j.yofte.2020.102280
L. Cheng, F. Song, K. Zhang, Y. Li, J. Yang (2020). A U-shape-wound fiber macro-bending loss crack sensor improved by an optical splitter. Optical Fiber Technology 58 102259. Doi: https://doi.org/10.1016/j.yofte.2020.102259
A. M. Hatta, K. Indriawati, T. Bestariyan, T. Humada, Sekartedjo (2013). SMS Fiber Structure for Temperature Measurement Using an OTDR. Photonic Sensors 3 (3) 262-266. Doi: https://doi.org/10.1007/s13320-013-0104-9
K. Dey, S. Roy, P. Kishore, M. S. Shankar, B. Ramesh, R. Ranjan (2021). Analysisi and performance of edge filtering interrogation scheme for FBG sensor using SMS fiber and OTDR. Result in Optics 2 100039. Doi: https://doi.org/10.1016/j.rio.2020.100039
S. M. Al-dabbagh, M. G. Said (2020). The influence of relative refractive index and core diameter on properties of singlemode optical fiber. Journal od Education and Science 29 (4) 124-139. Doi: https://doi,org/10.33899/edusj.2020.126908.1063
S. Q. Mohammed, A. M. Al-Hindawi (2017). Study of Optical Fiber Design Parameter in Fiber Optics Communication. Kurdistan Journal of Applied Research (KJAR) 2 (3). Doi: http://doi.org/10.24017/science.2017.3.52
M. J. Li, X. Chen, K. Li, J. E. Hurley, J. Stone (2019). Optical Fiber for 1310 nm Single-Mode and 850 nm Few-Mode Transmission. Proceedings of SPIE 10945 1094503. Doi: https://doi.org/10.1117/12.2516013
J. Ilouno, I. J. Audu (2018). Optical Time Domain Optical Time Domain Reflectometer Assessment of Attenuation in Fiber Optic Communication System. Journal of Engineering Research and Reports 1 (4) 1-6. Doi: https://doi.org/10.9734/jerr/2018/v1i49864
J. W. Costa, M. A. R. Franco, V. A. Serrao, C. M. B. Cordeiro, M. T. R. Giraldi (2019). Macrobending SMS fiber-optic anemometer and flow sensor. Fiber Optic Technology 52 101981. Doi: https://doi.org/10.1016/j.yofte.2019.101981
Y. N. Pang, et al (2021). Wearable Optical Fiber Sensor Based on a Bend Singlemode-Multimode-Singlemode Fiber Structure for Respiration Monitoring. IEEE Sensors Journal 21 (4) 4610 – 4617. Doi: https://doi.org/10.1109/JSEN.2020.3032646
H. Lin, F. Liu, Y. Dai, F. Mumtaz (2020). Relative humidity sensor based on FISM-SMS fiber structure coated with PVA film. Optik 207 164320. Doi: https://doi.org/10.1016/j.ijleo.2020.164320
Author Biography
Annamaintin Kobong Lebang, Hasanuddin University
License
Authors who publish with Indonesian Physical Review Journal, agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International Licence (CC BY SA-4.0). This license allows authors to use all articles, data sets, graphics, and appendices in data mining applications, search engines, web sites, blogs, and other platforms by providing an appropriate reference. The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Indonesian Physical Review Journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
