EDIBLE SPRAY COATING WITH WATER HYACINTH CELLULOSE AND COCONUT HUSK-BASED CARBON BLACK FOR FOOD APPLICATIONS
Authors
Annisa Nur Azahra , Raihan Muhammad Akmal , Pristy Tasya Nabila , Salsabilla Permata Bayah , Muhamad Iqbal Fauji , Yessie Widya SariDOI:
10.29303/ipr.v8i1.390Published:
2024-12-23Issue:
Vol. 8 No. 1 (2025)Keywords:
Antimicrobial, biobased, bioplastic, edible coating, food lifetimeArticles
Downloads
How to Cite
Abstract
Food waste and microbial contamination have led to an annual increase in foodborne diseases. One potential solution is the application of an edible spray coating (ESC) as a bioplastic, incorporating antibacterial agents. The spray technique is considered most effective due to its ease of application and controllable thickness. This research evaluates carbon black (CB) derived from coconut husk waste as an antibacterial agent in ESC. Coconut husk was selected because it contains up to 54% lignin. The ESC was formulated using a mixture of hydroxypropyl methylcellulose (HPMC), k-carrageenan, water hyacinth cellulose, and glycerol. Additionally, other antibacterial agents such as silver and chitosan were included as positive controls. The CB was produced through pyrolysis of coconut husk at 700 °C, with nitrogen gas added at a heating rate of 5 °C/min. The water hyacinth cellulose was extracted using a chemical method. In this study, ten ESC formulations were tested with varying concentrations of silver, chitosan, and CB. The resulting ESC viscosities ranged from 16.8 to 46.9 cP. Antimicrobial activity against E. coli and S. aureus demonstrated that ESC with 1.5% w/v CB exhibited antibacterial activity with inhibition zones of (2.2±0.3) mm and (32±3) mm, respectively. The application of ESC on cherry tomatoes and strawberries showed that samples containing CB experienced a lower weight loss over time. This indicates the potential of CB in preventing microbial contamination.References
N. L. W. Wilson, B. J. Rickard, R. Saputo, and S.-T. Ho, “Food waste: The role of date labels, package size, and product category,” Food Qual Prefer, vol. 55, pp. 35–44, 2017, doi: https://doi.org/10.1016/j.foodqual.2016.08.004.
L. Xue et al., “Missing Food, Missing Data? A Critical Review of Global Food Losses and Food Waste Data,” Environ Sci Technol, vol. 51, no. 12, pp. 6618–6633, Jun. 2017, doi: 10.1021/acs.est.7b00401.
FOOD WASTE INDEX REPORT 2021. 2021.
M. H. A. Rashid and M. A. Rahman, “Effects of modified atmosphere packaging (MAP) and natural edible coatings on con-trolling postharvest fungal infection, shelf life extension and quality retention of strawberry (Fragaria× ananassaDuch.),” Journal of Agriculture, Food and Environment, vol. 01, no. 03, pp. 14–23, 2020, doi: 10.47440/jafe.2020.1303.
W. Silva-Vera et al., “Study of Spray System Applications of Edible Coating Suspensions Based on Hydrocolloids Containing Cellulose Nanofibers on Grape Surface (Vitis vinifera L.),” Food Bioproc Tech, vol. 11, no. 8, pp. 1575–1585, 2018, doi: 10.1007/s11947-018-2126-1.
A. Valdés, M. Ramos, A. Beltrán, A. Jiménez, and M. C. Garrigós, “State of the Art of Antimicrobial Edible Coatings for Food Packaging Applications,” Coatings, vol. 7, no. 4, 2017, doi: 10.3390/coatings7040056.
S. Jali, T. P. Mohan, F. M. Mwangi, and K. Kanny, “A Review on Barrier Properties of Cellulose/Clay Nanocomposite Polymers for Packaging Applications,” Polymers (Basel), vol. 16, no. 1, 2024, doi: 10.3390/polym16010051.
W. Van Oijstaeijen et al., “Farmers’ preferences towards water hyacinth control: A contingent valuation study,” J Great Lakes Res, vol. 46, no. 5, pp. 1459–1468, 2020, doi: https://doi.org/10.1016/j.jglr.2020.06.009.
L. Motelica, D. Ficai, A. Ficai, O. C. Oprea, D. A. Kaya, and E. Andronescu, “Biodegradable Antimicrobial Food Packaging: Trends and Perspectives,” Foods, vol. 9, no. 10, 2020, doi: 10.3390/foods9101438.
Sarengaowa, W. Hu, K. Feng, Z. Xiu, A. Jiang, and Y. Lao, “Thyme oil alginate-based edible coatings inhibit growth of pathogenic microorganisms spoiling fresh-cut cantaloupe,” Food Biosci, vol. 32, Dec. 2019, doi: 10.1016/j.fbio.2019.100467.
H. H. Basri, R. A. Talib, R. Sukor, S. H. Othman, and H. Ariffin, “Effect of synthesis temperature on the size of ZnO nanoparticles derived from pineapple peel extract and antibacterial activity of ZnO–starch nanocomposite films,” Nanomaterials, vol. 10, no. 6, Jun. 2020, doi: 10.3390/nano10061061.
A. N. Mohan and B. Manoj, “Surface modified graphene/SnO2 nanocomposite from carbon black as an efficient disinfectant against Pseudomonas aeruginosa,” Mater Chem Phys, vol. 232, pp. 137–144, 2019, doi: https://doi.org/10.1016/j.matchemphys.2019.04.074.
E. Burchacka, K. Pstrowska, M. Kułażyński, E. Beran, H. Fałtynowicz, and K. Chojnacka, “Antibacterial agents adsorbed on active carbon: A new approach for s. aureus and e. coli pathogen elimination,” Pathogens, vol. 10, no. 8, Aug. 2021, doi: 10.3390/pathogens10081066.
L. Sanjuan-Navarro, Y. Moliner-Martínez, and P. Campíns-Falcó, “The state of art of nanocarbon black as analyte in a variety of matrices: A review,” TrAC Trends in Analytical Chemistry, vol. 157, p. 116769, 2022, doi: https://doi.org/10.1016/j.trac.2022.116769.
M. Yao, X. Bi, Z. Wang, P. Yu, A. Dufresne, and C. Jiang, “Recent advances in lignin-based carbon materials and their applications: A review,” Int J Biol Macromol, vol. 223, pp. 980–1014, 2022, doi: https://doi.org/10.1016/j.ijbiomac.2022.11.070.
C. Poornachandhra et al., “Coconut Husk Fiber: A Low-Cost Bioresource for the Synthesis of High-Value Nanocellulose,” Biointerface Res Appl Chem, vol. 13, no. 6, Dec. 2023, doi: 10.33263/BRIAC136.504.
H. P. S. Abdul Khalil, P. Firoozian, I. O. Bakare, H. Md. Akil, and A. Md. Noor, “Exploring biomass based carbon black as filler in epoxy composites: Flexural and thermal properties,” Mater Des, vol. 31, no. 7, pp. 3419–3425, 2010, doi: https://doi.org/10.1016/j.matdes.2010.01.044.
H. C. Oyeoka, C. M. Ewulonu, I. C. Nwuzor, C. M. Obele, and J. T. Nwabanne, “Packaging and degradability properties of polyvinyl alcohol/gelatin nanocomposite films filled water hyacinth cellulose nanocrystals,” Journal of Bioresources and Bioproducts, vol. 6, no. 2, pp. 168–185, 2021, doi: https://doi.org/10.1016/j.jobab.2021.02.009.
M. R. Putra, R. Karnila, and B. Hasan, “POTENTIAL CHITOSAN OF WASTE SHELL MANTIS SHRIMP (Harpiosquilla raphidea) AS ANTIBACTERIAL,” Asian Journal of Aquatic Sciences, vol. 6, no. 1, Apr. 2023, doi: 10.31258/ajoas.6.1.129-135.
X. H. Vu, T. T. T. Duong, T. T. H. Pham, D. K. Trinh, X. H. Nguyen, and V. S. Dang, “Synthesis and study of silver nanoparticles for antibacterial activity against Escherichia coli and Staphylococcus aureus,” Advances in Natural Sciences: Nanoscience and Nanotechnology, vol. 9, no. 2, Jun. 2018, doi: 10.1088/2043-6254/aac58f.
D. J. Pohan, R. S. Marantuan, and M. Djojosaputro, “Toxicity Test of Strong Drug Using the BSLT (Brine Shrimp Lethality Test) Method,” Int J Health Sci Res, vol. 13, no. 2, pp. 203–209, Mar. 2023, doi: 10.52403/ijhsr.20230228.
C. N. Banti and S. K. Hadjikakou, “Evaluation of toxicity with brine shrimp assay,” Bio Protoc, vol. 11, no. 2, Jan. 2021, doi: 10.21769/BioProtoc.3895.
N. A. Satya, D. Luthfiyani, C. Pradana, A. Kolib, and C. A. Aprilia, “Brine Shrimp Lethality Test on Aqueous Extract of Caesalpinia Sappan L,” 2021.
P. Ngamsurach and P. Praipipat, “Antibacterial activities against Staphylococcus aureus and Escherichia coli of extracted Piper betle leaf materials by disc diffusion assay and batch experiments,” RSC Adv., vol. 12, no. 40, pp. 26435–26454, 2022, doi: 10.1039/D2RA04611C.
P. Lertwattanaruk and A. Suntijitto, “Properties of natural fiber cement materials containing coconut coir and oil palm fibers for residential building applications,” Constr Build Mater, vol. 94, pp. 664–669, 2015, doi: https://doi.org/10.1016/j.conbuildmat.2015.07.154.
K. Giza, E. Owczarek, and A. Miszczyk, “The Effect of C45 Carbon Black-Phosphomolybdic Acid Nanocomposite on Hydrogenation and Corrosion Resistance of La2Ni9Co Hydrogen Storage Alloy,” Energies (Basel), vol. 16, no. 10, 2023, doi: 10.3390/en16104002.
J. H. Pratama, A. Amalia, R. L. Rohmah, and T. E. Saraswati, “The extraction of cellulose powder of water hyacinth (Eichhornia crassipes) as reinforcing agents in bioplastic,” AIP Conf Proc, vol. 2219, no. 1, p. 100003, May 2020, doi: 10.1063/5.0003804.
T. Chaiwarit, B. Chanabodeechalermrung, N. Kantrong, C. Chittasupho, and P. Jantrawut, “Fabrication and Evaluation of Water Hyacinth Cellulose-Composited Hydrogel Containing Quercetin for Topical Antibacterial Applications,” Gels, vol. 8, no. 12, 2022, doi: 10.3390/gels8120767.
C. Metzger, D. Auber, S. Dähnhardt-Pfeiffer, and H. Briesen, “Agglomeration of cellulose nanocrystals: the effect of secondary sulfates and their use in product separation,” Cellulose, vol. 27, no. 17, pp. 9839–9851, 2020, doi: 10.1007/s10570-020-03476-0.
Y. Kim, D. Jeong, K. H. Park, J.-H. Yu, and S. Jung, “Efficient Adsorption on Benzoyl and Stearoyl Cellulose to Remove Phenanthrene and Pyrene from Aqueous Solution,” Polymers (Basel), vol. 10, no. 9, 2018, doi: 10.3390/polym10091042.
R. B. González-González et al., “Characterization of Chemically Activated Pyrolytic Carbon Black Derived from Waste Tires as a Candidate for Nanomaterial Precursor,” Nanomaterials, vol. 10, no. 11, 2020, doi: 10.3390/nano10112213.
T. FAHMY, H. ELHENDAWI, W. B. ELSHARKAWY, and F. M. REICHA, “AC conductivity and dielectric relaxation of chitosan/poly(vinyl alcohol) biopolymer polyblend,” Bulletin of Materials Science, vol. 43, no. 1, p. 243, 2020, doi: 10.1007/s12034-020-02207-2.
M. A. F. Falah, P. Yuliastuti, R. Hanifah, P. Saroyo, and J. Jumeri, “QUALITY OF FRESH STRAWBERRY (Fragaria sp cv. HOLIBERT ) FROM KETEP MAGELANG CENTRAL JAVA AND ITS STORAGE IN TROPICAL ENVIRONMENT,” Jurnal Agroindustri, vol. 8, no. 1, pp. 1–10, May 2018, doi: 10.31186/j.agroindustri.8.1.1-10.
H. Adriel, R. Putra, A. W. Setiawan, F. Pertanian, B. Universitas, and K. S. Wacana, “Maintaining Quality of Cherry Tomato (Solanum Lycopersicum Var. Cerasiforme) using Chitosan at Room Temperature Storage,” vol. 28, no. 1, pp. 101–108, 2021.
Author Biography
Yessie Widya Sari, Department of Physics, Faculty of Mathematics and Natural Sciences, IPB University, Indonesia
License
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors who publish with Indonesian Physical Review Journal, agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International Licence (CC BY SA-4.0). This license allows authors to use all articles, data sets, graphics, and appendices in data mining applications, search engines, web sites, blogs, and other platforms by providing an appropriate reference. The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Indonesian Physical Review Journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).