SYNTHESIS AND CHARACTERIZATION OF MAGNETITE NANOMATERIALS IN TIANYAR IRON SAND USING CO-PRECIPITATION METHOD
Authors
Ni Putu Devi Kristina , I Gede Arjana , Putu YasaDOI:
10.29303/ipr.v7i3.328Published:
2024-07-25Issue:
Vol. 7 No. 3 (2024)Keywords:
Coprecipitation method, Irond sand, Magnetite (Fe3O4) nanomaterials, SEM-EDS, X-Ray Diffraction (XRD)Articles
Downloads
How to Cite
Abstract
In the current era of scientific and technological progress, nanomaterials have emerged as a deeply fascinating and significant field of research. This paper presents a case study on the synthesis and characterization of Fe₃O₄ nanomaterials derived from the iron sand of the Tianyar, utilizing the co-precipitation method with modifications made to the pH values during synthesis. The research encompasses three primary stages: extraction of iron sand, synthesis of Fe3O4 nanomaterials, and subsequent characterization of these nanomaterials. The iron sand extraction phase involved passing it through a permanent magnet ten times to remove impurities. Subsequent synthesis produced a dark black magnetite nanomaterial powder displaying magnetic properties, rendering it responsive to magnet attraction. Analysis of these nanomaterials using X-ray diffraction (XRD) unveiled discernible peaks in the diffraction pattern, suggesting that the magnetite nanomaterials possess a cubic crystal structure. The size of the Fe3O4 nanomaterials decreases as the pH of precipitation increases, with respective sizes of approximately 18.00 nm for pH 9, 14.69 nm for pH 10, and around 13.68 nm for pH 11, as determined using Scherrer’s formula. The lattice parameters observed for samples synthesized at pH 9, 10, and 11 are sequentially measured as a = 8.59 Å, 8.81 Å, and 8.80 Å. Analysis using SEM-EDS revealed that the sample morphology appears rough, with evidence of particle agglomeration leading to uneven particle distribution. There are additional trace elements present, including C, Al, S, Ti, and Cl, albeit in smaller quantities. Nevertheless, the primary elements crucial for forming Fe3O4 nanomaterials, namely Fe and O, exhibit the highest percentages in composition analysis.References
C. M. Donegá, Nanoparticles Workhorses of Nanoscience. 2014.
J. Jeevanandam, A. Barhoum, Y. S. Chan, A. Dufresne, and M. K. Danquah, "Review on nanoparticles and nanostructured materials: history, sources, toxicity and regulations," Beilstein J Nanotechnol, vol. 9, pp. 1050-1074, 2018, doi: 10.3762/bjnano.9.98.
B. Mekuye and B. Abera, "Nanomaterials: An overview of synthesis, classification, characterization, and applications," Nano Select, vol. 4, no. 8, pp. 486-501, 2023, doi: 10.1002/nano.202300038.
R. Revathy, T. Sajini, C. Augustine, and N. Joseph, "Iron-based magnetic nanomaterials: Sustainable approaches of synthesis and applications," Results in Engineering, vol. 18, 2023, doi: 10.1016/j.rineng.2023.101114.
I. Khan, K. Saeed, and I. Khan, "Nanoparticles: Properties, applications and toxicities," Arabian Journal of Chemistry, vol. 12, no. 7, pp. 908-931, 2019, doi: 10.1016/j.arabjc.2017.05.011.
S. L.-S. Carinelli, Maximina González-Mora, José Luis Salazar-Carballo, Pedro Ángel, "Synthesis and Modification of Magnetic Nanoparticles for Biosensing and Bioassay Applications: A Review," Creative Commons CC, 2023, doi: 10.20944/preprints202307.1398.v1. Creative Commons CC BY.
L. Shen, B. Li, and Y. Qiao, "Fe(3)O(4) Nanoparticles in Targeted Drug/Gene Delivery Systems," Materials (Basel), vol. 11, no. 2, Feb 23 2018, doi: 10.3390/ma11020324.
A. Wlodarczyk, S. Gorgon, A. Radon, and K. Bajdak-Rusinek, "Magnetite Nanoparticles in Magnetic Hyperthermia and Cancer Therapies: Challenges and Perspectives," Nanomaterials (Basel), vol. 12, no. 11, May 25 2022, doi: 10.3390/nano12111807.
Y. G. W. I Safitri, D Rosarina and Sudibyo, "Synthesis and characterization of magnetite (Fe3 O4 ) nanoparticles from iron sand in Batanghari beach," IOP Conf. Ser.: Mater. Sci. Eng., 2020, doi: 10.1088/1757-899X/1011/1/012020.
S. Aritonang, Jupriyanto, Juhana, R., "Analysis of The Process of Iron Sand Processing Into Sponge Iron in Order to Support The Defense Industry Of Steel Raw Materials," Jurnal Pertahanan & Bela Negara, vol. 9, 1, 2019.
H. Kurnio, "Coastal characteristics of iron sand deposits in Indonesia," Indonesian Mining Journal, vol. 10, p. 27, 2019.
I. W. Lugra, "Heavy Mineral Distribution Patterns And Characteristics Of Sea Floor Surficial Sediment At East Bali Waters, Bali Province," Bulletin Of The Marine Geology, vol. 26, 2011.
J. Best, "Human, environmental costs of sand, gravel mining overlooked — study," Education News Asia Canada Europe, 2021. [Online]. Available: https://www.mining.com/human-environmental-costs-of-sand-gravel-mining-overlooked-study/.
M. M. Ba-Abbad, A. Benamour, D. Ewis, A. W. Mohammad, and E. Mahmoudi, "Synthesis of Fe3O4 Nanoparticles with Different Shapes Through a Co-Precipitation Method and Their Application," Jom, vol. 74, no. 9, pp. 3531-3539, 2022, doi: 10.1007/s11837-022-05380-3.
I. A. Tyurikova, S. E. Alexandrov, K. S. Tyurikov, D. A. Kirilenko, A. B. Speshilova, and A. L. Shakhmin, "Fast and Controllable Synthesis of Core-Shell Fe(3)O(4)-C Nanoparticles by Aerosol CVD," ACS Omega, vol. 5, no. 14, pp. 8146-8150, Apr 14 2020, doi: 10.1021/acsomega.0c00392.
Z. I. Takai, Mustafa, M. K., Asman, S., & Sekak, K. A., "Preparation and Characterization of Magnetite (Fe3O4) nanoparticles By SolGel Method," International Journal of Nanoelectronics and Materials, vol. 12, pp. 37-46, 2019. [Online]. Available: https://www.researchgate.net/publication/330511880.
S. S. A. Erwin , P. Adhy, N. Utari , W. Ayu , Y. Wita, & S. Nani "Magnetic iron oxide particles (Fe3O4) fabricated by ball milling for improving the environmental quality," IOP Conf. Ser.: Mater. Sci. Eng., 2020, doi: 10.1088/1757-899X/845/1/012051.
E. A. Bakr, M. N. El-Nahass, W. M. Hamada, and T. A. Fayed, "Facile synthesis of superparamagnetic Fe(3)O(4)@noble metal core-shell nanoparticles by thermal decomposition and hydrothermal methods: comparative study and catalytic applications," RSC Adv, vol. 11, no. 2, pp. 781-797, Dec 24 2020, doi: 10.1039/d0ra08230a.
Darminto et al., "Preparing Fe[sub 3]O[sub 4] Nanoparticles from Fe[sup 2+] Ions Source by Co-precipitation Process in Various pH," presented at the AIP Conference Proceedings, 2011.
M. S. Yusuf, S. S, and R. Rahmasari, "Synthesis Processing Condition Optimization of Citrate Stabilized Superparamagnetic Iron Oxide Nanoparticles using Direct Co-Precipitation Method," Biomedical and Pharmacology Journal, vol. 14, no. 3, pp. 1533-1542, 2021, doi: 10.13005/bpj/2255.
M. Rahmayanti, "Synthesis of Magnetite Nanoparticles Using The Reverse Co-precipitation Method With NH4OH as Precipitating Agent and Its Stability Test at Various pH," Natural Science: Journal of Science and Technology, vol. 9, no. 3, pp. 54-58, 2020, doi: 10.22487/25411969.2020.v9.i3.15298.
S. Nurjanah, "Sintesis Dan Karakterisasi Nanopartikel Magnetik Fe3O4 Pasir Besi Glagah Kulon Progo Dengan Metode Kopresipitasi," UNY Journal, 2018. [Online]. Available: http://eprints.uny.ac.id/id/eprint/57966.
L. B. H. Rahayu, Wulandari, I. O., Santjojo, D. H., Sabarudin, A., "Pengaruh Kecepatan Pengadukan terhadap Karakteristik Nanopartikel Fe3O4 dengan Pelapisan Permukaan berbasis Polivinil Alkohol dan Glutaraldehid sebagai agen Crosslinker," Natural B, vol. 4, 2018.
M. S. Adhim, "Synthesis Of Fe3O4 (Magnetite) Nanoparticles From Iron Stone Using Co-Precipitation Method With Ph Variation," ITS Repository, vol. Bachelor, 2018.
D. Kiani, "X-Ray Diffraction (XRD)," in Springer Handbook of Advanced Catalyst Characterization, I. E. Wachs and M. A. Bañares Eds. Cham: Springer International Publishing, 2023, pp. 519-539.
J. Madhavi, "Comparison of average crystallite size by X-ray peak broadening and Williamson–Hall and size–strain plots for VO2+ doped ZnS/CdS composite nanopowder," SN Applied Sciences, vol. 1, no. 11, p. 1509, 2019/10/29 2019, doi: 10.1007/s42452-019-1291-9.
M. Lee, X-RAY Diffraction for Materials Research From Fundamentals to Applications. Apple Academic Press, Inc., 2016.
J. M. e. al., "University of Wisconsin, Madison ChemPRIME," libretexts, 2023. [Online]. Available: https://LibreTexts.org. [29] M. Sinhababu et al., "Surface Treatment of Industrial-Grade Magnetite Particles for Enhanced Thermal Stability and Mitigating Paint Contaminants," Nanomaterials (Basel), vol. 11, no. 9, Sep 4 2021, doi: 10.3390/nano11092299.
L. Aspillaga, D. Jan Bautista, S. N. Daluz, K. Hernandez, J. A. Renta, and E. C. R. Lopez, "Nucleation and Crystal Growth: Recent Advances and Future Trends," Engineering Proceedings, vol. 56, no. 1, p. 22, 2023. [Online]. Available: https://www.mdpi.com/2673-4591/56/1/22.
P. G. Vekilov, "Nucleation," Cryst Growth Des, vol. 10, no. 12, pp. 5007-5019, Nov 15 2010, doi: 10.1021/cg1011633.
M. Rukhsar, Z. Ahmad, A. Rauf, H. Zeb, M. Ur-Rehman, and H. A. Hemeg, "An Overview of Iron Oxide (Fe3O4) Nanoparticles: From Synthetic Strategies, Characterization to Antibacterial and Anticancer Applications," Crystals, vol. 12, no. 12, 2022, doi: 10.3390/cryst12121809.
A. W. Y. Putra Parmita et al., "Studi Pengaruh Temperatur Kalsinasi dalam Pembentukan Nanomagnetite dengan Metode Green Synthesis Ekstrak Daun Nanas," SPECTA Journal of Technology, vol. 7, no. 2, pp. 584-592, 2023, doi: 10.35718/specta.v7i2.940.
Resetiana Dwi Desiatia, Eni Sugiartia, Safitry Ramandhany, "Analisa Ukuran Partikel Serbuk Komposit NiCrAl dengan Penambahan Reaktif Elemen untuk Aplikasi LAPISAN Tahan Panas," METALURGI, vol. 1, pp. 27 - 34, 2018.
A. Sirivat and N. Paradee, "Facile synthesis of gelatin-coated Fe3O4 nanoparticle: Effect of pH in single-step co-precipitation for cancer drug loading," Materials & Design, vol. 181, 2019, doi: 10.1016/j.matdes.2019.107942.
F. J. Link and J. Y. Y. Heng, "Unraveling the Impact of pH on the Crystallization of Pharmaceutical Proteins: A Case Study of Human Insulin," Cryst Growth Des, vol. 22, no. 5, pp. 3024-3033, May 4 2022, doi: 10.1021/acs.cgd.1c01463.
K. C. Chinnam, "Capacitive pH-Sensors using pH sensitive polymer," IMEGO: Applied Micro Sensor Systems, p. 56, 2009. [Online]. Available: http://www.ep.liu.se.
I. K. U. HASANAH, "Sintesis Nanopartikel Maghemit ( Γ-Fe2O3 ) Sebagai Pigmen Dari Limbah Besi Bubut Dengan Variasi Prekursor Menggunakan Metode Presipitasi – Kalsinasi," Etheses of Maulana Malik Ibrahim State Islamic University, 2019.
S. Nelms. "How to Improve Your ICP-MS Analysis, Part 1 Contamination." https://www.thermofisher.com/blog/analyteguru/How-to-Improve-Your-ICP-MS-Analysis-Part-1-Contamination.
License
![Creative Commons License](http://i.creativecommons.org/l/by-nc-sa/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
Authors who publish with Indonesian Physical Review Journal, agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International Licence (CC BY SA-4.0). This license allows authors to use all articles, data sets, graphics, and appendices in data mining applications, search engines, web sites, blogs, and other platforms by providing an appropriate reference. The journal allows the author(s) to hold the copyright without restrictions and will retain publishing rights without restrictions.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgment of its initial publication in Indonesian Physical Review Journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).